Metal stamping parts are products that we usually touch more

Release time:2019-09-29

Metal stamping parts are products that we usually touch […]

Metal stamping parts are products that we usually touch more. It is made by the pressure of the die and the punching machine, so that the metal material is cut, bent, punched and formed in the cavity. Then, what are the precautions for metal stamping parts in production?

1. Regularly check the die mounting base of the punch turntable and stamping parts to ensure the coaxial precision of the upper and lower turntables.

2. Metal stamping parts should be inspected strictly before installation and use. The dirt should be removed. The guide sleeves and molds of the stamping parts should be carefully checked for good lubrication.
Metal stamping parts

3. In order to ensure the service life of the tensioning parts, the spring of the mold should be replaced regularly to prevent the fatigue damage of the spring from affecting the use of the drawn stamping parts.

4. When installing the mold, the stamping personnel should use soft metal to manufacture the operating tools to prevent damage to the stamped parts during the tapping and crushing during the installation process.
Metal stamping parts

5. When the punching and die cutting edges of the stamping parts are worn, they should be stopped in time and sharpened in time. Otherwise, the degree of wear of the cutting edge of the die will be rapidly expanded, the wear of the die will be accelerated, and the quality of the punching piece and the life of the die will be reduced.